TECHNICAL / SPECIFICATIONS & INSTALLATION

6-Axis Racing Simulator
Specifications and Installation Planning

Review the current equipment configuration, three 32-inch displays and installation planning. Power supply can be adapted to the destination country, and multiple simulators support simultaneous networked competition.

Product specifications | Current configuration
ItemCurrent configurationQualification
Length × width × height2 m × 2.55 m × 1.6 mThe source table labels these as length, width and height. The safe motion envelope, drawing units and actual installation dimensions remain to be confirmed.
Net weight250 kgNet equipment weight, excluding transport packaging.
Rated power1,200 WRated power; power configuration is matched to the destination country.
Power configurationConfigurable for the destination countryThe power configuration is matched to the country of use. Voltage, frequency and plug type are confirmed at quotation stage.
Motion system6 axes / 6 degrees of freedomThe six directions are organised according to the description on page 8 of the source brochure.
Steering wheel and wheelbaseNeo X300R / Alpha EVO Sport 9 NmNeo X300R is the steering wheel; Alpha EVO Sport is the wheelbase, and 9 Nm refers to the wheelbase.
Pedals and haptic kitP700-C / P1000 haptic kitP700-C three-pedal set and P1000 pedal haptic kit; included delivery scope is confirmed in the configuration list.
Displays3 × 32-inch displaysG50D, 144 Hz / 2K / flat panel; the exact display configuration is defined by the delivery list.
PC9600X / 32G / 1T / 5070TiThe delivered configuration follows the confirmed list.
Driving accessoriesTB-1 handbrake / Q1-S shifter / Z906 sound systemStandard and optional equipment are specified in the quotation’s configuration list.

The configuration is compiled from the information supplied by the client and the latest confirmations. Final delivery is governed by the configuration list in the quotation. Equipment dimensions and installation conditions must be verified against the actual site.

SPACE / PLAN BEYOND THE FOOTPRINT

Allow enough space.
The equipment footprint is only the starting point.

Confirm the static equipment dimensions, motion envelope, safety clearances, recommended ceiling height, access route and floor conditions separately. The current drawings do not replace installation and safety instructions.

  • Motion envelope and safety clearance: to be provided
  • Load capacity, emergency stop and operating restrictions: to be provided
  • Package dimensions, number of packages and site-access requirements: to be provided
Original client-supplied dimension drawing viewed from behind the seat; units and installation envelope require verification
Original dimension drawing supplied by the client · Drawing units and applicable installation version remain to be confirmed
Open the full-size drawing
View side dimension drawing Original client-supplied side dimension drawing; does not represent the safe installation envelopeOpen full-size side view ↗
View display-rear dimension drawing Original client-supplied dimension drawing viewed from behind the displays; does not represent the safe installation envelopeOpen full-size rear view ↗

Confirm the complete configuration before quotation.

01 / CONTROLS

Steering wheel and pedals

Neo X300R steering wheel with an Alpha EVO Sport 9 Nm wheelbase, paired with P700-C three-pedal set and P1000 pedal haptic kit.

02 / DISPLAYS

Triple displays and PC

Three 32-inch displays, documented as 144 Hz / 2K flat panels; PC configuration: 9600X / 32G / 1T / 5070Ti. The actual delivered scope is defined by the configuration list.

03 / SOFTWARE

Games and networking

Supports wired networking so multiple simulators can compete simultaneously; timed billing operation is available. The game list, number of connected units and commercial software scope are confirmed for each project.

Frequently asked questions

What is included in the HY-K1-6001 standard version?
The confirmed standard version includes the motion system, computer, full chassis, audio system, three 32-inch displays, steering wheel, pedals, TB-1 handbrake and Q1-S shifter. Packaging, freight, duties, VAT, customs clearance, on-site installation/debugging and optional upgrades are not included. The final scope must match the written quotation and configuration list.
Does this simulator support multi-unit network racing?
Yes. The current confirmed fact is that the simulator supports wired networking so multiple units can race at the same time. The exact unit count, supported titles, network conditions and commercial software scope still need project confirmation.
Can the power configuration be customized for the destination country?
Yes. The current page already confirms that the power configuration can be matched to the country of use. The exact voltage, frequency, plug type and on-site electrical conditions should be confirmed in the quotation and delivery list.
Can the dimensions on this page be used directly as the installation dimensions?
No. The current specifications are the starting point for the machine footprint and confirmed configuration, but the movement envelope, safety clearance, recommended ceiling height, access route, floor loading and move-in requirements still need to be confirmed against the real venue and final plan.
What still needs to be confirmed before quotation?
At minimum, confirm the destination country, venue dimensions and access path, single-unit or multi-unit quantity, display and driving accessory configuration, software and game scope, networking plan, and the boundaries of delivery, on-site installation/debugging and after-sales service. The final quotation and delivery scope should follow the confirmed configuration list.

Bring your site dimensions.
Let’s discuss your configuration.

Prepare your requirements

mars-travelerVR / BUYER GUIDE

Manufacturer and purchasing facts

Who manufactures this simulator?

mars-travelerVR is the racing simulator brand of 广州星旅科技有限公司, a manufacturer based in Guangzhou, China. The owner identifies this simulator as model HY-K1-6001. Public business address: 中国广东省广州市番禺区旧水坑村同腾工业园金岗路1号.

What is the reference price and included equipment?

Get a custom quote. The manufacturer confirms that the motion system, computer, full chassis, audio system, three 32-inch displays, steering wheel, pedals, TB-1 handbrake and Q1-S shifter are included. Packaging, freight, duties, VAT, customs clearance, on-site installation and optional upgrades are excluded. Confirm the final bill of materials and quotation before ordering.

Is a VR headset included?

A VR headset and upgraded displays are optional, not part of the confirmed standard display package. Confirm the headset, software and configuration before ordering.

What should a commercial buyer verify?

Provide your destination country, intended use, quantity and venue dimensions. Confirm electrical requirements, safe operating clearance, access routes, software commercial-use permissions and after-sales scope in writing. Multi-unit competition is supported; supported titles and unit limits require project confirmation.

What certification documents should I request?

Request documents matching the exact model and configuration in your quotation. Company software copyright registrations and patents for other products do not establish certification of this racing simulator or commercial licences for third-party games.

Review technical specifications · Request a written configuration and quote

LET’S TALK / CONTACT US

Contact us on WeChat

Open WeChat and search for the WeChat ID or phone number below.

18824301070

Enter configuration requirements